So for sqft of

Retaining wall blocks and caps are an important part of any retaining wall system. They help to distribute the weight of the soil or other material being held back, and they also add a level of stability and security to the structure.

If you are thinking about installing a retaining wall, it is important to consider using a geogrid. Geogrids provide reinforcement for retaining walls and can help ensure that your wall is able to withstand the pressure of soil and water.

A well-constructed retaining wall will help to control erosion and protect your property, but it’s important to ensure that the drainage is adequate so water doesn’t build up behind the wall and cause damage.

Retaining wall must have properly compacted backfill. Backfill refers to the dirt behind the wall. In order to provide proper drainage, at least 12 inches of granular backfill (gravel or a similar aggregate) should be installed directly behind the wall. Compacted native soil can be used to backfill the rest of the space behind the wall.

Using glue on retaining walls has many advantages. First, glue is easier to use than mortar because you don't have to mix it. Compared to mortar, construction adhesive dries much quicker, taking only a few hours instead of several days. Glue is also less messy and easier to clean up.

Interlocking pavers are exceptional in large driveways and walkways; adding interest, curb appeal and also increasing the value of your home. It is important to understand the preparation for the installment of interlocking pavers before you start your project. For the job to get done right it to needs have a compacted sub base, a geotextile fabric, a layer of sand, edge restraint, pavers, and joint fill material.

Paver base is a crushed gravel mixture used to provide a solid foundation for interlocking pavers. The size of the aggregate usually ranges from 3/4 of an inch down to dust, so the material will lock together when compressed. Pavestone paver base can be purchased by bag or in bulk, It can be stone chips or sands

A paver edge restraint is installed once the pavers have all been installed and the cuts have all been completed. With this process completed, the edge restraint is then installed prior to the joint fill installation. It is important that the restraint is in place and secure prior to the joint fill installation because the pavers will in most cases need to be compacted during this stage of the process. Without a proper restraint in place, the paving stones may move out of place.

Geotextiles are permeable textiles or fabrics used to separate, filter, reinforce, protect, or drain. In roads and rail applications, they allow filtration and separation of granular layers. They are also used to protect membranes in landfill applications and in coastal defense applications. Geotextiles are high in strength to allow for maximum slope support, stabilization and erosion control. There are three types of geotextiles: non-woven, woven or knitted.

Polymeric sand is a material used to fill paver joints, the empty spaces found between each paver, tile or natural stone. It is sometimes called jointing sand, paver sand or hardscape sand. ... Polymeric sand is appreciated by paver installers because joints you get from it are durable and even .

The base material for artificial turf goes on top of your existing dirt, serving as a barrier between your turf and the dirt underneath. Without an appropriate base, you could see big problems with your artificial turf: pooling water due to a lack of drainage, and a warped, uneven turf surface.

fabric separate base gravel and sub base ( dirt ) prevent weed growing and sinking.

Turf would be the main cost. it depends on manufacturer and turf style normally costs about 5-10 per sqft

Sand will be applied after the turf is installed in order to keep the turf stand up and fill space between. Sand would cost $50-$80 bag cover around 10-20sqft turf

Delivery fees apply for Pavers Ordered and Delivery to the Jobsite , its not included in Material costs , each pallet is about 3,000 lbs , Semi Truck can get about 5-7 Pallets . its cost about $250-$500 .

Fueling fees , The average costs for 500sqft would cost 2 trucks for 2-3 days to finish the job . so each 500sqft would cost $250 to pump fuel for all trucks from our shop to jobsite .

Pallet fees , The paver manufacture charge fees to carry pavers over to jobsite, and our company has to pay fee to disposal them after its done.

Clean up fee : Crews has to clean up all the debris and work areas 15-30 mins at the end of the day . for 1000 sqft of Paver , with stones cut to make sure safety we have to spend our time for it . we charge $250 fees for every 1000sqft to clean up the area

The portable bathroom for a crew use when we taking a bigger project .

Labor is the most significant and Varied cost involved in Paver Patio, The Skilled Landscape labor forced in recently . For about 600-800 sqft of flat surface not a raised patio, it would take about 5-6 days to finish with experienced Crews.

Landscaping professionals may be easily injured in their workplaces and should carry appropriate insurance coverage in case of accidents. Workers’ compensation, sometimes called workers’ comp or workman’s comp, can help cover medical fees and lost wages for landscapers who sustain work-related injuries.

What's business insurance? Insurance helps protect from the cost of bodily injury or property damage claims against our business.

Fees to cover accounting services , payroll , Employee work compensation , Estimating software, Website etc

Fee to cover Estimator for their time and trip .

Fee to cover equipment repair, leasing , rental, what ever need for the job.

Money left over after all the labor, overhead, materials, it's about 10-15% of total project cost. for example project costs 1K - all company profit is about $100-$200